University is a city with a real mix of properties: single-family homes on aging supply lines, apartment complexes with shared drain stacks, rental houses where the plumbing has been patched more than once, and commercial spaces that cannot afford a fixture failure during business hours. The work that comes out of a place this size covers the full range, from a toilet that has been running for a week to a slab leak that has been quietly adding to the water bill for a month.
We handle all of it. Plumbing repair, fixture installation, water heater replacement, drain cleaning, slab leak detection, repiping, and emergency calls are all part of the scope. When you call, you reach someone who can scope the job on the phone, confirm the price before anything is scheduled, and get it on the calendar. Galvanized, copper and PEX pipes each fail in their own way, and knowing which one you are dealing with changes how the job is approached.
Call (727) 632-6595 and we will walk through what the work involves before anyone is sent out.
Most plumbing problems announce themselves gradually before they become urgent. A drain that was slow last month is now stopped. A water heater that was producing warm water is now producing none. A toilet that rocked slightly when you sat on it has started leaking at the base. The jobs below are the ones we handle most often in University, and each one starts with a situation rather than a symptom.
An outdoor faucet that drips constantly or a hose bib that no longer shuts off fully wastes water and can feed moisture into the wall behind it. Irrigation connections that have cracked at the fitting or started weeping at the valve are worth addressing before the wet season arrives and the ground is already saturated. We repair and replace outdoor faucets, hose bibs, and the supply connections that feed irrigation systems, and we confirm the shutoff valve at the source is working before the visit closes.
A drain snake clears a path through a clog. Hydro jetting cleans the interior wall of the pipe. For kitchen drain lines that have accumulated grease over years, or main lines in older properties where buildup has narrowed the pipe, jetting is the method that actually restores capacity rather than just restoring flow temporarily. We assess the line before recommending it, because jetting is not the right tool for every situation, and a line with structural damage needs a different approach.
No hot water is one of the more disruptive plumbing failures a household or a business can face. The cause determines the fix: a failed heating element, a tripped thermostat, a pressure relief valve that has discharged, or a tank that has corroded past the point of repair all present differently. Inconsistent hot water, where the temperature drops mid-shower or the unit takes longer to recover than it used to, often points to sediment buildup or a component that is beginning to fail. We diagnose before recommending a repair or a replacement, and the price is confirmed before either is scheduled.
A refrigerator water line that is leaking at the wall connection or at the back of the appliance can go unnoticed for a long time behind the unit. By the time it is found, the flooring or the wall behind it may already be affected. We handle the supply line side of this: the connection at the shutoff valve, the line running to the appliance, and the valve itself if it has started to weep. The appliance itself is not our scope, but the water supply to it is.
Pressure that has dropped across the whole house points toward the pressure regulator, the main shutoff valve, or a supply line that has narrowed through corrosion. Pressure that is low at one fixture but normal everywhere else is usually a fixture-level problem: a clogged aerator, a failing cartridge, or a supply line that is partially blocked. We work through the diagnosis from the meter inward, confirm the cause, and explain what the repair involves before anything is opened up.
Getting your plumbing problem handled starts with a quick call. When you describe the situation, we scope the job on the phone and give you a price before anything is scheduled. That price covers what the visit involves: the diagnosis, the repair, and the materials for a standard job of that type.
A few things can change what a job costs once the work is underway. If the fault turns out to be further along the line than it appeared on the phone, or if reaching it requires opening a wall or cutting into the slab, the scope changes and we communicate that before proceeding. No additional work is added without a conversation first. The goal is clear communication from the first call to the final test, not a number that shifts without explanation.
Call (727) 632-6595 and describe what the fixture or line is doing.
We will ask the questions that help us scope it accurately, give you the rate on the call, and confirm what it covers. If the problem is one where the full scope cannot be determined until the work begins, we tell you that on the call and explain what the visit will involve. You get the information you need to decide before anything is booked.
A water heater that is no longer producing hot water needs a diagnosis before anything else. The unit may have a failed component that can be replaced at a fraction of the cost of a new unit, or it may have reached the point where repair is not the practical answer. The age of the unit, the nature of the fault, and the condition of the tank all factor into that assessment.
In University, many properties have been extended or renovated over the years, and the original water heater was sized for the original footprint. A unit that was adequate for a two-bedroom home may not keep up after a bathroom addition or a conversion that added a second kitchen. When that is the situation, sizing the replacement correctly matters more than simply swapping like for like. We go over the demand, the available fuel source, and the options for tank or tankless before confirming the price and scheduling the installation.
The repair pressure-tested before the job is called done applies to water heater work the same as it applies to every other job. The output is tested under working conditions before anyone leaves.
Whether it's a single faucet or a full repipe, some plumbing failures cannot be put on a waiting list. A burst supply line, a sewer backup affecting multiple fixtures, or a water heater that has failed in a rental unit with a tenant in place all need a response that fits the situation. We are available every day from 6:00 AM to 10:30 PM, including weekends, and we take short-notice calls the same way we take scheduled ones: the job is scoped, the price is confirmed, and the appointment is set.
For rental properties and commercial accounts in University, we work around occupancy. If a tenant needs to be present, we confirm that on the call. If a business needs the work completed before opening or during a window that does not affect operations, we talk through what the schedule allows when you book. The process is the same regardless of the property type. Call and we will get your water back on.
Knowing where the main water shutoff is located is one of the most useful things a property owner or a tenant can know. In most University homes, the main shutoff is near the meter at the street or at the point where the supply line enters the building. Turning it off stops water from reaching any fixture in the house and limits how much damage a burst line or a failed supply valve can cause while you wait for a visit.
For a single fixture, most toilets have an individual shutoff valve at the base of the supply line. Sinks have shutoffs under the cabinet. Turning off the fixture-level valve rather than the main keeps the rest of the house running while the affected fixture is isolated. If you are not sure where the shutoff is or whether it is working, that is worth mentioning when you call, because a shutoff valve that will not close fully is a problem in its own right. No pressure and no gimmicks, just sound, lasting plumbing, and a straight answer about what the situation calls for.
We take plumbing calls across University and the neighboring communities throughout Hillsborough County. That includes Lake Magdalene, Temple Terrace, Lutz, Carrollwood, and Egypt Lake-Leto. Whether the property is in University proper or in one of the surrounding areas, the process is the same: the job is scoped on the call, the price is confirmed before anything is scheduled, and the work is carried out and tested before the visit closes.
If you are not sure whether your address falls within our coverage area, call (727) 632-6595 and we will confirm it on the phone.
Coverage questions get answered the same way everything else does: directly, on the first call. Anyone sizing up a job in University may want to read the page that lists our plumbing services first.
Yes. We work on plumbing regardless of who originally installed it. If the addition has non-standard work that affects how the job is approached, we will flag that and explain what it means for the repair or installation.
Yes. Water filtration and softener installation is part of the scope of work we handle. The installation connects to the main supply line at the point of entry, before the water reaches any fixture in the house. We confirm the connection points, the bypass valve, and the drain line for the softener during the visit, and the system is tested before the job is closed out.
The Gulf Coast limestone aquifer produces hard water across this region, and University is no exception. Mineral buildup accumulates inside tank water heaters, on aerators, inside cartridges, and along supply lines over time. A water heater that is accumulating sediment loses efficiency and tends to fail earlier than one operating in softer water conditions. If you are noticing buildup at fixture outlets or a water heater that takes longer to recover than it used to, those are worth a call.
In many cases, yes. If you have several minor issues across the property, go over all of them when you call and we will scope what is realistic to address in one visit. Combining jobs is often more practical than booking separate appointments for each one.
They can be useful for your own reference, but the most important thing is a clear description of what you are seeing. When you call, describe the symptom, where it is occurring, and how long it has been happening. That is what we use to scope the job and confirm the price on the call.
Water supply boundaries do not always follow municipal boundaries, and a property on the edge of a service area can sometimes be on a different provider's supply. If you are unsure which supply your property is on, the water utility serving your address can confirm it. The plumbing work inside the property is handled the same way regardless.
Shared drain stacks in multi-unit buildings concentrate the consequences of a single clog: when the main line is restricted, every unit on that stack is affected. Rental properties also tend to accumulate deferred maintenance, so a visit that starts as a drain cleaning sometimes reveals a shutoff valve that has not moved in years or a supply line that has been weeping behind a cabinet. We scope what we find and communicate before adding anything to the original job.
Not in most cases. We handle the shutoff as part of the visit. If there is a situation where shutting off the supply before we arrive would help, we will let you know that on the call when the job is scoped.
Yes. A crawl space gives access to supply and drain lines that would otherwise be buried or hidden, which can make diagnosis and repair more straightforward in some cases. It also introduces its own considerations around moisture and access. We assess what the crawl space involves and factor it into the scope before the job is priced.
The plumbing issue that has been easy to ignore, the drain that is slow but still moving, the water heater that is working but not quite right, the pressure that dropped months ago and never came back, does not resolve on its own. It gets worse at the least convenient moment.
Call (727) 632-6595 and we will scope it, price it, and get it handled.
We are available every day from 6:00 AM to 10:30 PM. The call is the point it stops getting worse.
Local work. Sound pipes. Costs set out on the call.
Plumbing work also reaches these towns: Carrollwood, Egypt Lake-Leto, Town 'n' Country, Riverview.
Have a look at our coverage area.
Below is a plain look at the plumbing work we handle across University, Hillsborough County and Hillsborough County, what each service covers, and who it fits best. Every job starts with a call where we go over the scope and the price before anything is scheduled. Use the table to find what you need, then call and we will walk you through the rest.
| Service | What It Covers | Best For | Things to Keep in Mind |
|---|---|---|---|
| Water Heater Repair & ReplacementMost Popular | Tank and tankless unit diagnosisElement, thermostat, and valve checksFull replacement with proper sizingOutput tested before job closes | No hot water, inconsistent temperature, or a unit past its useful life | Sizing a replacement unit to match actual household demand is what determines whether the new unit performs from day one. |
| Leak Detection & Repair | Pressure testing supply linesElectronic leak locatingCopper, PVC, PEX, and galvanized repairSlab and underground leak repair | Unexplained water bills, wet spots, or visible water where it should not be | Finding the source before opening walls or cutting concrete keeps the repair scope as small as possible. |
| Garbage Disposal Service | Disposal diagnosis and resetFull unit replacementDrain connection checkSupply and switch confirmation | A disposal that hums but will not spin, leaks at the base, or has stopped responding entirely | A disposal that leaks at the base rather than at the connection usually needs replacement, not repair. |
Call (727) 632-6595 and we will go over what the job involves, what it covers, and what it costs before anything is booked.
(727) 632-6595